Used Tria Plastics Equipment

Stock# 10755147

Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60

Stock# 54129002

Used Tria Model TR 120 49 Granulator | 50 HP | 1,200 kg/hr | Water-Cooled, Soundproofed Plastic Recycling Grinder. Diameter: 490 mm Rotor Width: 1,200 mm Feed Opening: Approximately 970 mm wide 120 mm high Rotor Type: Open rotor with 5 rows of 2 knives (10 total) Stator (Bed) Knives: 4 total (2 front, 2 rear) Drive Motor: 50 HP (approx. 37 kW) Voltage: 460V / 480V, 3-Phase Frequency: 60 Hz Cutting Chamber: Water-cooled Throughput Capacity: Up to ~1,200 kg/h (varies by material & screen size) Construction: Soundproofed steel enclosure with hinged access doors Screen Area: Large discharge screen for high throughput Feed System: Rear trap-door (ideal for thermoforming line integration) Knife Material: Tungsten-tipped for extended wear life Noise Reduction: Fully enclosed sound-insulated casing.